Technical Specifications
SPL
113 dB
Amplifier Power
250 W Bass (Class D) + 150 W Midrange (Class D) + 150 W Treble (Class D)
Frequency Response
32 Hz - 43 kHz ("-6 dB")
Accuracy of Frequency Response
± 1.5 dB (38 Hz - 20 kHz)
Driver Dimensions
2 x H 101 x W 218 mm Bass + ⌀ 130 mm Midrange + ⌀ 25 mm Treble (view in inches)
Dimensions
H 454 x W 287 x D 278 mm, with Iso-Pod™ (view in inches)
Weight
14.3 kg / 31.5 lb
Connections
1 x XLR Analog Input
1 x XLR AES/EBU Input
1 x XLR AES/EBU Output
2 x RJ45 Control
8351B SAM™ Studio Monitor
SAM™ Studio Monitor
Technical Specifications
A revolution in three-way monitor design, the 8351B boasts a unique look, compact size and a performance that has to be heard to be believed.
System Specifications
Frequency Response
38 Hz - 20 kHz (± 1.5 dB)
Low cutoff -6dB
32 Hz
High cutoff -6dB
43 kHz
SPL
Peak SPL Maximum peak SPL output per pair on top of console at 1 m with music material.
≥118 dB
Short term max SPL Maximum short term sine wave SPL output at 1 m on axis in half space, averaged as specified (from 100 Hz to 3 kHz).
≥113 dB
Long term max SPL Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 1 m.
≥103 dB
Self-generated noise
Self-generated noise Self generated noise level in free field at 1 m on axis (A-weighted)
≤5 dB SPL
Weight
Weight14.3 kg (31.5 lb)
Dimensions
Height
433 mm
Height with Iso-Pod
454 mm
Width
287 mm
Depth
278 mm
Enclosure
Enclosure material
Die cast aluminium
Enclosure type
Reflex port
Drivers
Driver type
Racetrack
Dual 218 x 101 mm (85/8 x 4 in) obround cones
Count
2
Width
218 mm
Height
101 mm
Driver type
Coaxial
8351B midrange driver cone (coaxial)
Diameter
130 mm
Driver type
Coaxial
8351B treble driver metal dome (coaxial)
Diameter
25 mm
Directivity
Harmonic distortion
Group delay
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF (top graph)
3.1 ms
Extended Phase Linearity in GLM set to ON (bottom graph)
7.5 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
Amplifier Section
Amplifiers
250 W Class D
150 W Class D
150 W Class D
Mains voltage
100-240 VAC 50/60Hz
Power consumption
ISS Active
≤1 W
Idle
≤16 W
Full output
200 W
Signal processing section
Connectors
Input Analog signal input connector XLR female (10 kOhm input load impedance).
Input XLR female (conforms to IEC 60958-4)
Output XLR male (conforms to IEC 60958-4)
2 x Control Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.
Crossover
Bass/Mid
320 Hz
Mid/Treble
2800 Hz